No scrap yard operates inside Richardson: the K Avenue yard just inside Plano, Community Recycling, lies 2.2 miles from City Hall and under a mile from CityLine, while Geomet and Encore in Garland sit about 5 miles southeast. Bare bright averaged $5.60 per pound across Texas yards in late October 2026, and Richardson's BABIC program hauls large appliances on request.

Scrap metal prices per lb in Richardson

Richardson scrap price boardUSD · Nov 20, 2026, 9:59 PM GMT+0000
Scrap typePrice (USD)ChangeGlobal reference
Non-ferrous (per lb)
Copper Scrap $4.77 / lb ▼ -2.45% $4.77 / lb
Aluminum Scrap $0.71 / lb ▲ +0.00% $0.71 / lb
Brass Scrap $3.02 / lb ▼ -2.27% $3.02 / lb
Stainless Steel Scrap $0.56 / lb ▲ +0.00% $0.56 / lb
Lead Scrap $0.60 / lb ▲ +0.00% $0.60 / lb
Zinc Scrap $0.40 / lb ▲ +0.00% $0.40 / lb
Battery Scrap $0.23 / lb ▲ +0.00% $0.23 / lb
Radiator Scrap $2.74 / lb ▼ -2.49% $2.74 / lb
Wire Scrap $2.30 / lb ▼ -2.54% $2.30 / lb
Cable Scrap $1.53 / lb ▼ -3.16% $1.53 / lb
Electronic Scrap $0.66 / lb ▼ -2.94% $0.66 / lb
Ferrous and bulk (per ton)
Steel Scrap $300 / ton ▲ +0.00% $300 / ton
Iron Scrap $264 / ton ▲ +0.00% $264 / ton
Car Scrap $360 / ton ▲ +0.00% $360 / ton
Cast Iron $288 / ton ▲ +0.00% $288 / ton

Indicative dealer prices for clean, sorted scrap in the United States, shown here for Richardson. Individual yards quote around this level by grade, volume and condition; the derivation from exchange benchmarks and the exchange rate (1 USD = 1.00 USD) is described in the methodology section below.

Richardson at a Glance

Population
118,542 (Census estimate, 1 July 2025)
Population change
Richardson +570; Dallas-Fort Worth +123,557 over the year to July 2025
Metro population
8,477,157 in the Dallas-Fort Worth-Arlington metro
County
Dallas County and Collin County
ZIP codes
7 touch city limits, 3 mostly inside
Major areas
Central Richardson, Richardson Heights, Canyon Creek, the UT Dallas area and CityLine
Location
The Telecom Corridor suburb just north of Dallas, home of the University of Texas at Dallas
Elevation
Near 629 ft at City Hall
Land area
28.6 square miles
All 7 ZIP codes in Richardson

Mostly or wholly inside city limits: 75080, 75082, 75081.

Partly inside city limits, with the share of land in the city: 75075 (1%), 75044 (0%), 75074 (0%), 75243 (0%). In these ZIP codes, check whether your address is in the city before relying on city services or city rules.

Richardson figures: Census Vintage 2025 estimate for place 4861796 (118,542); ZCTA overlap covering 75080, 75082 and 75081; USGS elevation at 32.9723, -96.7081; land area 28.6 sq mi from the 2024 Gazetteer.

Texas yard averages used for Richardson

Source: ScrapMonster, Texas state averageReported: 23 Oct 2026Age: 29 days

No Richardson buyer posts dated prices, so use these Texas averages as a yardstick and phone Community Recycling at (972) 423-3824 for nonferrous quotes or Geomet at (972) 303-8849 for steel.

GradeReported priceSource and dateNational board todayReport vs national
Bare bright copper $5.60 / lb ScrapMonster, Texas state average, 23 Oct 2026 $5.09 +10%
#1 copper $5.50 / lb ScrapMonster, Texas state average, 23 Oct 2026 – –
Yellow brass $3.10 / lb ScrapMonster, Texas state average, 23 Oct 2026 $3.02 +3%
Red brass $4.00 / lb ScrapMonster, Texas state average, 23 Oct 2026 – –
Brass radiators $2.75 / lb ScrapMonster, Texas state average, 23 Oct 2026 – –
Aluminum scrap $0.53 / lb ScrapMonster, Texas state average, 23 Oct 2026 $0.71 -25%
Cast aluminum wheels $0.75 / lb ScrapMonster, Texas state average, 23 Oct 2026 $0.71 +6%

These are dated Texas state averages, the closest published figures for Richardson; they are not quotes from Richardson yards, which typically trade within a few percent of them. Each row links to its source. The national column is today's board, so the gap moves with the market, and rows older than 45 days are removed at the weekly check.

How Richardson scrap prices have moved: 7, 30 and 90 days

Dallas-area yards set the quotes Richardson sellers hear against these exchange moves:

GradeBoard today7 days30 days90 days
Copper Scrap$4.77 / lb-9.8%-16.2%-16.6%
Brass Scrap$3.02 / lb-8.8%-14.2%-14.2%
Aluminum Scrap$0.71 / lb-9.0%-10.1%-18.4%
Stainless Steel Scrap$0.56 / lb0.0%0.0%-1.8%
Steel Scrap$300 / ton0.0%0.0%+1.7%

Changes are calculated from the daily closing level of the national board on this site, which tracks exchange prices. They update every day; local yard quotes usually follow within days.

Richardson scrap prices per pound and per ton

Richardson loads priced from the dated Texas rows; copper and other regulated grades are settled by check or transfer.

GradePer lbPer short ton (2,000 lb)Worked example
Bare bright copper$5.60$11,20040 lb of bare bright copper: 40 lb x $5.60 = $224.00
#1 copper$5.50$11,00020 lb of #1 copper: 20 lb x $5.50 = $110.00
Yellow brass$3.10$6,20025 lb of yellow brass: 25 lb x $3.10 = $77.50
Brass radiators$2.75$5,500Two car radiators, about 40 lb: 40 lb x $2.75 = $110.00
Aluminum scrap$0.53$1,060150 lb of aluminum siding and gutters: 150 lb x $0.53 = $79.50
Cast aluminum wheels$0.75$1,500Four alloy wheels, about 80 lb: 80 lb x $0.75 = $60.00

Per-ton figures multiply the per-pound price by 2,000. Yards deduct for attachments, insulation, oil or dirt, so a mixed load pays less than the clean-grade figure. For any other weight, use the scrap calculator.

Richardson scrap price chart (USD)

Daily open, high, low and close for the most traded scrap metals in USD, the same series Richardson yards price against. Scroll to zoom and drag to move along the timeline.

Copper Scrap USD / lb
Current Price
 
Daily Change
 
Weekly Change
 
Monthly Change
 
Yearly Change
 

The scrap market in Richardson

Richardson, the Telecom Corridor suburb that is home to UT Dallas, has no scrap yard inside its 28.6 square miles; local searches mostly turn up junk haulers and electronics recyclers. The closest buyer is Community Recycling on K Avenue in Plano, 2.2 miles from City Hall and only 0.8 miles from CityLine, which takes copper, brass and aluminum but not steel. For steel and heavy loads, central Richardson is about 4 miles from Geomet and Encore on International and Shiloh roads in Garland, while Canyon Creek and the UT Dallas area are 6 to 7 miles away.

Converter thieves have worked Richardson's newer districts too. At 3:45 a.m. on 20 August 2022 a hotel employee at CityLine heard metal cutting in the parking garage and called 911; the suspect drove off, was followed a short way into Plano, and surrendered with cutting tools and three converters, two of them taken from a car in that garage.

On r/Richardson the scrap-adjacent question tends to involve whole cars. A resident who had a wrecked car towed home while waiting for an insurance adjuster asked whether the city would fine him; replies cited the city rule that such vehicles cannot sit in public view, suggested a cover in the meantime, said the city's community services staff answer email and usually send a notice before any ticket, and pointed out that an insurer declaring a total loss will normally make a salvage offer and tow the car itself.

Jurisdiction
Texas, United States
Quoted in
Dollars a pound for nonferrous; ferrous by the ton
Governing law
Texas Occupations Code ch. 1956
Scrap yards in the city
None; nearest on K Avenue in Plano
ID
Government photo ID for every regulated sale
Bulky pickup
BABIC brush and bulky collection on request

Where the scrap yards are in Richardson

  • K Avenue in Plano: Community Recycling, 2.2 miles from City Hall and the nearest buyer for nonferrous metal.
  • International and Shiloh roads in Garland: Geomet and Encore, side by side for steel, appliances and big loads.
  • Out on Commerce Street, east Garland: DFW Industrial Metals, a smaller, highly rated yard that closes for lunch.

What pays well in Richardson

  • Copper, brass and aluminum, the only metals K Avenue pays for.
  • Appliances, steel and junk cars at the Garland yards.
  • Copper and other regulated grades settled by check or electronic payment rather than cash.

Find a scrap yard near you in Richardson

Google scrap-yard listings around Richardson; tap Garland, TX, Plano, TX and Dallas, TX to widen the search.

Or pick an area:

Map and listings come live from Google Maps and are not stored by this site. Ratings describe service, not price: call a yard before you load to confirm hours and today's prices.

Scrap prices near me in Richardson: the closest yards by neighborhood and ZIP code

Nearest-yard distances in Richardson: City Hall area to Community Recycling (Plano), 2.2 mi; Central Richardson to Community Recycling (Plano), 3.6 mi; Richardson Heights to Geomet Recycling (Garland), 4.9 mi; Canyon Creek to Community Recycling (Plano), 2.8 mi; UT Dallas to Community Recycling (Plano), 3.5 mi; CityLine to Community Recycling (Plano), 0.8 mi. By ZIP centroid: 75080 3.5; 75082 2.3; 75081 3.3 miles.

NeighborhoodClosest listed yardMilesNext closest
City Hall areaCommunity Recycling (Plano)2.2Geomet Recycling (Garland) (5.1 mi)
Central RichardsonCommunity Recycling (Plano)3.6Geomet Recycling (Garland) (3.8 mi)
Richardson HeightsGeomet Recycling (Garland)4.9Community Recycling (Plano) (5.2 mi)
Canyon CreekCommunity Recycling (Plano)2.8Geomet Recycling (Garland) (6.3 mi)
UT DallasCommunity Recycling (Plano)3.5Geomet Recycling (Garland) (6.8 mi)
CityLineCommunity Recycling (Plano)0.8Geomet Recycling (Garland) (6.4 mi)
Closest listed yard for every Richardson ZIP code
ZIP codeClosest listed yardMiles
75080Community Recycling (Plano)3.5
75082Community Recycling (Plano)2.3
75081Geomet Recycling (Garland)3.3

Distances are straight-line miles from the neighborhood center or the ZIP code's Census center point to each yard, so the drive is longer. Only the verified yards listed on this page are included.

Top-reviewed scrap yards in Richardson

Richardson has no yard, so the four buyers below are the nearest ones with consistent reviews, checked against Google listings and phone numbers. We left out a Range Drive yard in Garland with reviews describing a seller held at a locked gate after closing and a staff member who shouted at customers, a Buckingham Road yard where reviewers say everything was priced as tin, and Richardson computer recyclers and junk haulers that do not buy metal.

1. Geomet Recycling (Garland)

Garland, southeast of Richardson (South International Road)

300 S International Rd, Garland, TX 75042
Phone: (972) 303-8849

Roughly 4 miles from central Richardson and the better first stop of the two Garland neighbors for small loads: can sellers report under-10-minute visits, the lot is kept clear of nails, and itemized receipts list each grade. First-time customers have received a free T-shirt. Its 400-plus reviews average 4.5. Open 7 to 4:30 Monday through Friday and 7 to 2 on Saturday.

Reviews and directions on Google Maps

2. Encore Recyclers (Garland)

Garland, southeast of Richardson (South Shiloh Road)

301 S Shiloh Rd, Garland, TX 75042
Phone: (972) 272-5845

A few blocks from Geomet, so Richardson sellers can collect two quotes in one drive. More than 700 reviews average 4.3, with praise for organized traffic control in the yard and friendly cashiers; truck drivers waiting on outbound freight are the main complainers. It keeps the longest weekday hours of the group, closing at a quarter to six, plus Saturdays from 7:30 until 2.

Reviews and directions on Google Maps

3. DFW Industrial Metals (Garland)

East Garland (Commerce Street)

1340 Commerce St, Garland, TX 75040
Phone: (972) 276-2400

The farthest of the four at about 7 miles from City Hall but the best rated, at 4.7, with repeat can and copper sellers praising fair prices and quick, courteous service. It breaks for lunch at midday and stays closed on weekends.

Reviews and directions on Google Maps

4. Community Recycling (Plano)

Plano, just north of Richardson (K Avenue)

917 K Ave, Plano, TX 75074
Phone: (972) 423-3824

The closest buyer to most of Richardson, 0.8 miles from CityLine and 2.2 from City Hall. Bring nonferrous only: the yard pays for copper, brass and aluminum but takes steel, mufflers and computer parts without payment. Reviewers call it an old-school junkyard with honest owners, warn that map apps may send you to the exit gate, and say late December gets busy with plumbers. Open weekdays 8 to 5 and Saturday mornings until noon.

Reviews and directions on Google Maps

Phone numbers confirmed on Google on 2 November 2026 for Community Recycling, (972) 423-3824; Geomet, (972) 303-8849; Encore, (972) 272-5845; and DFW Industrial Metals, (972) 276-2400. Reddit material comes from r/Richardson.

Richardson scrap yards compared

Geomet, Encore and Community all trade on Saturday mornings; Encore stays open latest on weekdays, Community opens at 8, and DFW Industrial is weekdays only with a lunch break.

YardAreaHoursPhoneRegistrationMiles from Richardson City Hall
Geomet Recycling (Garland)Garland, southeast of Richardson (South International Road)Mon-Fri 7:00-4:30; Sat 7:00-2:00(972) 303-8849Garland5.1
Encore Recyclers (Garland)Garland, southeast of Richardson (South Shiloh Road)Mon-Fri 7:00-5:45; Sat 7:30-2:00(972) 272-5845Garland5.3
DFW Industrial Metals (Garland)East Garland (Commerce Street)Mon-Fri 8:00-12:00, 1:00-5:00(972) 276-2400Garland7.3
Community Recycling (Plano)Plano, just north of Richardson (K Avenue)Mon-Fri 8:00-5:00; Sat 8:00-12:00(972) 423-3824Plano2.2

Richardson scrap yards by area

AreaYardsOpen SaturdayClosest yard area for
GarlandGeomet Recycling (Garland); Encore Recyclers (Garland); DFW Industrial Metals (Garland)SomeRichardson Heights
PlanoCommunity Recycling (Plano)YesCity Hall area, Central Richardson, Canyon Creek, UT Dallas, CityLine

Distances are straight-line miles from Richardson City Hall; hours are from each yard's Google listing.

Richardson's BABIC pickup and what to keep for a yard

Richardson hauls large appliances, furniture and anything heavier than 50 pounds through its weekly Brush and Bulky Item Collection, BABIC, on request at cor.net/babic, by phone at (972) 744-4111 or through the MyRichardson app. Keep bulky items in a pile apart from brush; smaller pieces such as microwaves and desk chairs can ride with regular trash, which the city collects twice a week, usually from the alley.

The city's drop-off recycling stations accept cardboard, cans and plastics but do not pay. If an appliance still has copper tubing or brass valves, strip those for Community Recycling and let BABIC take the steel shell.

Selling scrap metal in Richardson: rules, ID and payment

Our search found no Richardson scrap ordinance of its own, and since 2023 state law has kept Texas cities from adding converter rules, so a Richardson seller deals mainly with the Department of Public Safety's framework in Occupations Code chapter 1956; the three Garland yards on this page, though, also answer to Garland's own recycler ordinance, under which each yard renews a permit with that city every year and records a seller's thumbprint when buying regulated metal. What counts as regulated metal is broad, taking in copper, aluminum wire, air-conditioning components and converters, and any of it requires you to present government photo ID, sign a statement of ownership or authority to sell, and be photographed with the material. The buyer, which must itself hold a DPS certificate, may not process or resell that metal for 72 hours outside weekends and holidays, extended to five days for converters and eight for cemetery vases, and an officer can lengthen a hold to 60 days in writing. Money changes hands by check, money order or electronic transfer, except for sellers carrying a recycler-issued card for cash transactions, which is granted only after the recycler records their thumbprint, photograph, birth date and identification number and which lapses within two years. A converter has to be documented to the vehicle it came off, and unlawful converter dealing is punished as a state jail felony. On 1 September 2025 Senate Bill 1646 added that telecom and utility copper or brass can be purchased solely from firms that obtained it through regular commerce, with fire-salvage paperwork required for burned communication wire. For Richardson sellers who work late, no licensed Richardson buyer may accept regulated grades such as copper from Richardson sellers after 9 p.m., while each Richardson buying day is capped at 15 hours.

Before any sale, check the live board above, sort by grade and get quotes from two or three buyers; the best scrap price guide covers the routine and the calculator turns a weight into a figure at today's price. To judge whether a local quote is competitive, our note on telling a well-paying yard from a headline rate sets out the benchmark test.

Selling specific items in Richardson: appliances, AC units, batteries and converters

Split the load

Because Community Recycling pays only for nonferrous metal, Richardson sellers save a trip by sorting at home: copper, brass and aluminum to K Avenue, steel and appliances to Garland.

Wrecked and junk cars

If insurance declares a total loss, the insurer usually handles salvage. Otherwise keep a disabled car out of public view under city rules and sell it, title in hand, to a Garland yard that takes vehicles.

Parking-garage converters

Garage and hotel lots near CityLine have been hit. If you hear cutting at night, call 911, as the employee who stopped the 2022 CityLine theft did.

BABIC for appliances

Large appliances and anything over 50 pounds can go out through BABIC on request; small items like microwaves go with regular trash. Pull copper line sets first if you plan to sell them.

Richardson scrap price FAQ

What is the scrap copper price in Richardson today?

As of the latest update, the indicative price for clean number 1 copper is about $4.77 per lb in USD. Richardson yards typically quote within a few percent of that figure either side, depending on grade, volume and the buyer; the live board above shows all fifteen grades.

Is there a scrap yard in Richardson, TX?

No. The closest is Community Recycling on K Avenue in Plano, about 2 miles from City Hall; Geomet and Encore in Garland handle steel and larger loads.

Which yard is closest to CityLine?

Community Recycling in Plano, less than a mile away.

Does Richardson pick up old appliances?

Yes, through the Brush and Bulky Item Collection, known as BABIC; request it at cor.net/babic, by phone at (972) 744-4111 or in the MyRichardson app.

Can I keep a wrecked car in front of my house in Richardson?

City rules do not allow a wrecked or inoperable vehicle to sit in public view; cover it, move it or arrange salvage.

Which nearby yard stays open latest?

Encore Recyclers in Garland, which stays open until a quarter to six on weekdays.

Will a Texas yard pay cash for copper?

Only to sellers holding a recycler-issued card for cash deals; everyone else receives a check, a money order or a bank transfer.

Sources and methodology

The Richardson board uses the the United States indicative prices: global exchange benchmarks (COMEX copper, CME aluminum and steel, NYMEX platinum and palladium, IMF monthly lead, zinc and nickel) multiplied by typical yard recovery shares, a local market factor of 1.00 and the day's exchange rate. The full method, the recovery shares and the correction policy are on our editorial policy page; local notes on this page are reviewed against published dealer information and reader corrections sent to info@scrappricetoday.com.

Prices are indicative and for information only; they are not offers to buy or sell. Yard quotes in Richardson vary by grade, volume, condition and buyer.

Nearby and related

Scrap metal prices in the United States · All countries · Catalytic converter prices