Scrap Metal Prices in Pennsylvania Today

Scrap metal prices in Pennsylvania today, with the state's 48-hour police hold rule and the extra city rules that apply in Philadelphia.

Updated · Prices in USD per lb and per ton · Reviewed by the Scrap Price Today editorial team

Pennsylvania's Scrap Material Theft Prevention Act requires yards to record each sale and take seller ID, and a police hold applies only after a stolen-property notice, for up to 48 hours. Philadelphia adds a check-only rule for copper, brass and AC coils.

Scrap metal prices per lb in Pennsylvania

Pennsylvania scrap price boardUSD · Nov 20, 2026, 9:59 PM GMT+0000
Scrap typePrice (USD)ChangeGlobal reference
Non-ferrous (per lb)
Copper Scrap $4.77 / lb ▼ -2.45% $4.77 / lb
Aluminum Scrap $0.71 / lb ▲ +0.00% $0.71 / lb
Brass Scrap $3.02 / lb ▼ -2.27% $3.02 / lb
Stainless Steel Scrap $0.56 / lb ▲ +0.00% $0.56 / lb
Lead Scrap $0.60 / lb ▲ +0.00% $0.60 / lb
Zinc Scrap $0.40 / lb ▲ +0.00% $0.40 / lb
Battery Scrap $0.23 / lb ▲ +0.00% $0.23 / lb
Radiator Scrap $2.74 / lb ▼ -2.49% $2.74 / lb
Wire Scrap $2.30 / lb ▼ -2.54% $2.30 / lb
Cable Scrap $1.53 / lb ▼ -3.16% $1.53 / lb
Electronic Scrap $0.66 / lb ▼ -2.94% $0.66 / lb
Ferrous and bulk (per ton)
Steel Scrap $300 / ton ▲ +0.00% $300 / ton
Iron Scrap $264 / ton ▲ +0.00% $264 / ton
Car Scrap $360 / ton ▲ +0.00% $360 / ton
Cast Iron $288 / ton ▲ +0.00% $288 / ton

Indicative dealer prices for clean, sorted scrap in the United States, shown here for Pennsylvania. Individual yards quote around this level by grade, volume and condition; the derivation from exchange benchmarks and the exchange rate (1 USD = 1.00 USD) is described in the methodology section below.

Pennsylvania scrap price chart (USD)

Daily open, high, low and close for the most traded scrap metals in USD, the same series Pennsylvania yards price against. Scroll to zoom and drag to move along the timeline.

Copper Scrap USD / lb
Current Price
 
Daily Change
 
Weekly Change
 
Monthly Change
 
Yearly Change
 

The scrap market in Pennsylvania

Pennsylvania has long-established steel geography and good mill access, which supports the ferrous bid in much of the state. Processing capacity is spread rather than concentrated, so the haul from a rural county to a serious buyer can be substantial even though the state as a whole is well served.

The regulatory frame is the Scrap Material Theft Prevention Act of 2008, a statewide law, with cities such as Philadelphia adding their own junk-dealer rules on top.

0
Pennsylvania
1
Statewide rules under the Scrap Material Theft Prevention Act (Act 113 of 2008)
2
Police hold only after a stolen-property notice, up to 48 hours
3
Philadelphia pays copper, brass and AC coils by check under city code

Where the scrap yards are in Pennsylvania

  • Pittsburgh and the southwest: the deepest industrial supply and mill access.
  • Philadelphia and the southeast: dense yard competition and port logistics.
  • The Lehigh Valley: manufacturing and demolition supply.
  • Central and northern counties: longer hauls to a processor, which the bid reflects.

What pays well in Pennsylvania

  • Prepared heavy ferrous, supported by established regional mill demand.
  • Structural steel from demolition, where the state has consistent buyers.
  • Clean copper and brass, where the grade premium is widest; in Philadelphia these are paid by check under city code.

Selling scrap metal in Pennsylvania: rules, ID and payment

Pennsylvania's Scrap Material Theft Prevention Act (Act 113 of 2008) requires yards to record each purchase and take seller identification. A hold applies only when a police officer reports material as stolen: the yard must keep it intact for up to 48 hours after the notice, and longer only if a magisterial district judge finds probable cause. Bills to add a 48-hour payment hold for catalytic converters (House Bill 612) and to move the act into the Crimes Code (Senate Bill 914, passed by the Senate 48 to 0 in October 2025) were still in House committee when we checked in October 2026. An earlier version, House Bill 791 of 2023, passed the House but expired at the end of 2024 without becoming law. Cities can add their own rules: Philadelphia requires payment by check for copper, bronze, plumbing fixtures and air-conditioner coils.

Before any sale, check the live board above, sort by grade and get quotes from two or three buyers; the best scrap price guide covers the routine and the calculator turns a weight into a figure at today's price. To judge whether a local quote is competitive, our note on telling a well-paying yard from a headline rate sets out the benchmark test.

Pennsylvania scrap price FAQ

What is the scrap copper price in Pennsylvania today?

As of the latest update, the indicative price for clean number 1 copper is about $4.77 per lb in USD. Pennsylvania yards typically quote within a few percent of that figure either side, depending on grade, volume and the buyer; the live board above shows all fifteen grades.

How long is the hold in Pennsylvania?

There is no automatic hold. Under Act 113 of 2008 a yard must hold material only after a police officer reports it as stolen, for up to 48 hours after the notice, and longer only if a magisterial district judge finds probable cause. A proposed 48-hour payment hold for catalytic converters had not become law when we checked in October 2026.

Who regulates Pennsylvania scrap dealers?

The Scrap Material Theft Prevention Act sets statewide record and identification rules, and licensing is local. In Philadelphia, scrap yards hold a city Auto Wrecking / Waste Handling license from the Department of Licenses and Inspections, which you can look up in the city's open data.

What law governs this?

The Scrap Material Theft Prevention Act, Act 113 of 2008. Two bills to change it, House Bill 612 and Senate Bill 914, were in House committee when we checked in October 2026.

Why are Pennsylvania yards so careful about paperwork?

Because the act makes the yard responsible for recording each sale and the seller's identification, and cities such as Philadelphia add their own record and payment rules on top.

Is the bid good in Pennsylvania?

In the industrial southwest and southeast, generally yes, with established mill demand. In central and northern counties the haul to a serious processor is longer and the bid reflects it.

Sources and methodology

The Pennsylvania board uses the the United States indicative prices: global exchange benchmarks (COMEX copper, CME aluminum and steel, NYMEX platinum and palladium, IMF monthly lead, zinc and nickel) multiplied by typical yard recovery shares, a local market factor of 1.00 and the day's exchange rate. The full method, the recovery shares and the correction policy are on our editorial policy page; local notes on this page are reviewed against published dealer information and reader corrections sent to info@scrappricetoday.com.

Prices are indicative and for information only; they are not offers to buy or sell. Yard quotes in Pennsylvania vary by grade, volume, condition and buyer.

Nearby and related

Scrap metal prices in the United States · All countries · Catalytic converter prices