Live scrap prices in Compton, CA—three scales inside the city, the Alameda corridor's best board, watch-the-scale wisdom, and the 2026 copper rules.

Scrap metal prices per lb in Compton

Compton scrap price boardUSD · Nov 20, 2026, 9:59 PM GMT+0000
Scrap typePrice (USD)ChangeGlobal reference
Non-ferrous (per lb)
Copper Scrap $4.77 / lb ▼ -2.45% $4.77 / lb
Aluminum Scrap $0.71 / lb ▲ +0.00% $0.71 / lb
Brass Scrap $3.02 / lb ▼ -2.27% $3.02 / lb
Stainless Steel Scrap $0.56 / lb ▲ +0.00% $0.56 / lb
Lead Scrap $0.60 / lb ▲ +0.00% $0.60 / lb
Zinc Scrap $0.40 / lb ▲ +0.00% $0.40 / lb
Battery Scrap $0.23 / lb ▲ +0.00% $0.23 / lb
Radiator Scrap $2.74 / lb ▼ -2.49% $2.74 / lb
Wire Scrap $2.30 / lb ▼ -2.54% $2.30 / lb
Cable Scrap $1.53 / lb ▼ -3.16% $1.53 / lb
Electronic Scrap $0.66 / lb ▼ -2.94% $0.66 / lb
Ferrous and bulk (per ton)
Steel Scrap $300 / ton ▲ +0.00% $300 / ton
Iron Scrap $264 / ton ▲ +0.00% $264 / ton
Car Scrap $360 / ton ▲ +0.00% $360 / ton
Cast Iron $288 / ton ▲ +0.00% $288 / ton

Indicative dealer prices for clean, sorted scrap in the United States, shown here for Compton. Individual yards quote around this level by grade, volume and condition; the derivation from exchange benchmarks and the exchange rate (1 USD = 1.00 USD) is described in the methodology section below.

Compton at a Glance

Population
90,500 (Vintage 2025 Census estimate)
Population change
Holding steady on fully built ten square miles
Metro population
Los Angeles County, about 9.6 million
County
Los Angeles—the Hub City sits near its geographic heart
ZIP codes
90220 west, 90221 east, 90222 north
Major areas
Downtown Compton, Richland Farms, Sunny Cove, West Compton, the Rosecrans corridor
Location
South Los Angeles County between the 710 and the 110, on the freight rail spine
Elevation
About 70 feet
Land area
About 10 square miles
Worth knowing
Richland Farms' agricultural zoning—and its riders—date to the city's 1888 founding era
All 4 ZIP codes in Compton

Mostly or wholly inside city limits: 90220, 90222, 90221.

Partly inside city limits, with the share of land in the city: 90059 (4%). In these ZIP codes, check whether your address is in the city before relying on city services or city rules.

Vintage 2025 estimates over TIGERweb geometry; hauler bulletin for collection rules.

How Compton scrap prices have moved: 7, 30 and 90 days

Benchmarks against the exchanges—with the freight corridor in its backyard, the Hub City's boards give up less to hauling than nearly anywhere inland.

GradeBoard today7 days30 days90 days
Copper Scrap$4.77 / lb-9.8%-16.2%-16.6%
Aluminum Scrap$0.71 / lb-9.0%-10.1%-18.4%
Brass Scrap$3.02 / lb-8.8%-14.2%-14.2%
Steel Scrap$300 / ton0.0%0.0%+1.7%
Stainless Steel Scrap$0.56 / lb0.0%0.0%-1.8%

Changes are calculated from the daily closing level of the national board on this site, which tracks exchange prices. They update every day; local yard quotes usually follow within days.

Compton scrap price chart (USD)

Daily open, high, low and close for the most traded scrap metals in USD, the same series Compton yards price against. Scroll to zoom and drag to move along the timeline.

Copper Scrap USD / lb
Current Price
 
Daily Change
 
Weekly Change
 
Monthly Change
 
Yearly Change
 

The scrap market in Compton

Compton's supply is working-city metal: the truck yards and machine shops along Alameda, renovation copper and iron from a century-old housing stock, and the constant appliance churn of dense blocks.

The rail spine pays a dividend—with the freight corridor running straight through, the yards here feed mills directly, and the Alameda Street stretch is where locals swear the region's best copper board lives.

Density is the seller's edge: three buying windows inside city limits within two miles of the census point, a Sunday option included, so Compton rarely hauls anywhere else.

The gate inspection
Photo beside the load, ID copy, thumbprint, plate in the book—all nonferrous sales.
The corral wait
Nonferrous money releases with business day three—collect at the window or take the mail.
Brand-registered lanes
Five-plus monthly regulars, licensed businesses, sub-$20 copper-free CRV skip the wait.
AB 476 fence line
Scrap copper requires a CSLB license or listed exemption, with ownership proven; no minors.
Stallion paperwork
Converters: delayed traceable pay, photo, VIN, donor vehicle, written account on file.
County brand
Hydrants, meters, signal and charger parts sell only with the owning agency's release.

Where the scrap yards are in Compton

  • North Alameda holds the industrial pair—the tight-lot high payer and the seven-day window up the street.
  • Bullis Road's counter serves the east side daily, cans to cast iron, no appointment and no phone.
  • Paramount's Garfield Avenue center backs the whole map up with long Saturday hours one town over.

What pays well in Compton

  • Copper rides highest and carries 2026's new paperwork: the license-or-exemption rule means your provenance now matters as much as your grade.
  • Aluminum and brass turn over daily—CRV bags, fixtures, radiator brass—with the small-container lane paying on the spot.
  • Steel and appliance iron move by the truckload, and the horse-keeping blocks add their own line: fence pipe, corral panels, and tack-room iron.

Find a scrap yard near you in Compton

Three pins inside the city—two on North Alameda, one on Bullis—and the Paramount backup east on Garfield, all within a ten-minute radius.

Or pick an area:

Map and listings come live from Google Maps and are not stored by this site. Ratings describe service, not price: call a yard before you load to confirm hours and today's prices.

Scrap prices near me in Compton: the closest yards by neighborhood and ZIP code

Run from the census point by the civic center; everything that buys sits inside three and a half miles, most of it inside two.

NeighborhoodClosest listed yardMilesNext closest
Census centerLu Mar Industrial Metals1.2AM Recycling Center (1.5 mi)
Richland FarmsAM Recycling Center1.8Lu Mar Industrial Metals (2.1 mi)
Downtown ComptonLu Mar Industrial Metals1.1AM Recycling Center (1.1 mi)
Sunny CoveAM Recycling Center1.2D&T Recycling Metals & CRV (1.2 mi)
West ComptonLu Mar Industrial Metals2.6New World Recycling (3.0 mi)
Rosecrans north sideLu Mar Industrial Metals0.5New World Recycling (1.0 mi)
Closest listed yard for every Compton ZIP code
ZIP codeClosest listed yardMiles
90220Lu Mar Industrial Metals2.7
90221AM Recycling Center2.0
90222Lu Mar Industrial Metals0.5

Distances are straight-line miles from the neighborhood center or the ZIP code's Census center point to each yard, so the drive is longer. Only the verified yards listed on this page are included.

Top-reviewed scrap yards in Compton

The Hub City set: the high-paying tight lot, the no-phone daily counter, the Sunday window, and Paramount's long-hours backup.

1. Lu Mar Industrial Metals

North Alameda Street, about 1.2 miles

2120 N Alameda St, Compton, CA 90222
Phone: (323) 636-0156

Buys: Industrial and household scrap, strong copper board.

4.2 stars over about 49 reviews—the corridor's price leader by its regulars' math, worth the squeeze of a famously tight unloading lane; the gate has closed well ahead of schedule often enough that locals arrive by early afternoon. Weekdays from 7; Saturday 7-1.

Reviews and directions on Google Maps

2. AM Recycling Center

North Bullis Road, about 1.5 miles

1807-1857 N Bullis Rd, Compton, CA 90221
Phone: No listed phone — walk-in counter

Buys: CRV containers, cans, light scrap, daily service.

3.6 stars across about 84 reviews—the east side's every-day counter, praised for turning the scale display toward the seller; bring the universal habits anyway—watch each weigh, keep your own tally, count the cash at the window. Open daily, 8:30 starts.

Reviews and directions on Google Maps

3. New World Recycling

North Alameda at Greenleaf, about 1.8 miles

3100 N Alameda St, Compton, CA 90222
Phone: (424) 226-7027

Buys: Cans, CRV, household metal.

3.8 stars from about 29 reviews—the corridor's Sunday window and its quieter line; paperwork at the payout runs unhurried, so budget the extra quarter hour and enjoy the elbow room the busy lots never offer. Mon-Sat 8-4; Sunday 9-1.

Reviews and directions on Google Maps

4. D&T Recycling Metals & CRV

Garfield Avenue, Paramount, about 3.4 miles

14113 Garfield Ave, Paramount, CA 90723
Phone: (562) 531-4990

Buys: CRV plus scrap metal, wire barrels, bottle lanes.

3.9 stars across about 124 reviews—the long-hours backup with supplied baskets and barrels and a loyal decades-deep clientele; the gate has locked minutes before the posted close, so treat 4:30 as the honest deadline, and caps come off plastic before the machine. Mon-Sat, full days.

Reviews and directions on Google Maps

The Gardena scales ten minutes west remain the polished-service alternative when a Compton line stalls. Whatever the window: unscheduled curb piles are code violations in this city, utility and signal hardware is dead stock without an agency release, and the watch-the-scale habit is culture here, not insult.

Compton scrap yards compared

Price, patience, or the calendar: Alameda's tight lot pays best, Bullis shows you the scale, and Sunday belongs to the Greenleaf corner.

YardAreaHoursPhoneRegistrationMiles from Compton center
Lu Mar Industrial MetalsNorth Alameda Street, about 1.2 milesMon-Fri from 7; Sat 7-1(323) 636-0156North Alameda1.2
AM Recycling CenterNorth Bullis Road, about 1.5 milesDaily from 8:30No listed phone — walk-in counterBullis Road1.5
New World RecyclingNorth Alameda at Greenleaf, about 1.8 milesMon-Sat 8-4; Sun 9-1(424) 226-7027Alameda at Greenleaf1.8
D&T Recycling Metals & CRVGarfield Avenue, Paramount, about 3.4 milesMon-Sat, treat 4:30 as close(562) 531-4990Paramount3.4

Every window here closes earlier than its sign at least sometimes—the corridor's one universal rule is morning.

Horses on Alondra, scales on Alameda

Richland Farms is the rare agricultural zone that survived inside a dense city, and the Compton Cowboys turned its stables into a civic emblem—riders mentoring kids, horses at city parades, a ranch's rhythm ten minutes from three scrap scales. The neighborhood sheds real ranch metal too: corral panels, fence pipe, horseshoe-shop clippings.

The farm blocks also explain the city's scrap manners. Stock towns run on papers and reputations, and Compton's windows work the same—regulars move fast because the book already knows them, and a first-timer with clean paper becomes a regular by the third visit.

The dumping fight, and the free quarterly truck

Illegal dumping is the Hub City's long war—alleys and curbs collect what lazier hands won't haul—and the city's hauler contract pushes back with a real alternative: every household gets one free bulk pickup each quarter, up to six items, scheduled 48 hours ahead by phone. Unscheduled curb piles, the same notice warns, are violations, not collections.

Scrappers sit on the useful side of this fight. A washer in the alley is a citation waiting; the same washer at an Alameda scale is cash before noon. The local habit worth spreading: run the metal yourself, schedule the quarterly truck for the sofa, and the alley stays clear without anyone's fine.

Watch-the-scale country

Compton's review pages hand down counter wisdom with unusual bluntness, and the best of it generalizes: pick the window where the display faces you, watch the numbers land as each container tips, jot your own weights, and count the payout before your boots leave the mat. One Bullis Road counter earns specific praise for turning its readout toward the seller—the small transparency that settles every argument early.

Timing lore matters here too. The tight Alameda lot that pays the area's best board also fills fast and has been known to shut its gate well before the posted hour—regulars treat two in the afternoon as closing and arrive by one. Paramount's center runs the same way at five. In this corridor, the early seller is the paid seller.

Selling scrap metal in Compton: rules, ID and payment

In Richland Farms nobody buys a horse without papers, and B&P Code 21600 through 21610—California's junk dealer law—treats nonferrous metal like livestock with a brand. The inspection happens at the gate: you photographed beside the load, your ID copied, a thumbprint taken, the plate entered in the book. Then the corral: nonferrous payment rests until the third business day, released at the window or posted to your recorded address, with the brand-registered exceptions—sellers the yard knows five times a month or more, businesses with their license on file, and copper-free CRV runs under twenty dollars—riding past the wait. The newest fence line is AB 476: since January 2026, scrap copper moves only from sellers holding a CSLB contractor's license or standing inside one of the listed exemptions, ownership proven, and never from a minor. Catalytic converters are the stallion's paperwork of this system—payment delayed, traceable, never cash, the unit photographed, VIN and donor vehicle entered, the seller's written story kept. Public hardware wears the county's brand and cannot change hands without it: hydrants, manhole covers, backflow valves, streetlight and signal parts, meters, EV-charger pieces, all dead stock without the owning agency's written release. And the newest statute, AB 1941 of September 2026, hands organized metal theft a count of its own, reaching the crew on the pole and whoever staked the ride. Compton's city code adds no scrap chapter; the state's brand book covers every corral in town.

Before any sale, check the live board above, sort by grade and get quotes from two or three buyers; the best scrap price guide covers the routine and the calculator turns a weight into a figure at today's price. To judge whether a local quote is competitive, our note on telling a well-paying yard from a headline rate sets out the benchmark test.

Selling specific items in Compton: appliances, AC units, batteries and converters

Corral iron and fence pipe

Richland Farms sheds panels, gate hardware, and fence pipe with every stable project. It grades as pipe and light structural—knock the concrete off the post ends and the load stops paying the dirt discount.

Renovation copper, with its papers

Century-old blocks give up supply lines and fixture brass in every remodel, and AB 476 made the seller's standing part of the price. Keep permits and receipts with the buckets; the exemption question goes easiest with paper in hand.

The CRV counterweight

Can money is Compton's daily economy, and sub-$20 copper-free runs pay instantly outside the three-day rule. Separate the aluminum from the bimetal cans at home—mixed bags price at the worse rate every time.

Alley finds, done lawfully

A dumped dryer is not free metal: hauling it unasked can read as theft, and dumping one yourself is a citation. The lawful route—property owner's okay in writing, then the scale—turns the same alley into honest pocket money.

Compton scrap price FAQ

What is the scrap copper price in Compton today?

As of the latest update, the indicative price for clean number 1 copper is about $4.77 per lb in USD. Compton yards typically quote within a few percent of that figure either side, depending on grade, volume and the buyer; the live board above shows all fifteen grades.

Which Compton yard pays the most?

Local consensus hands North Alameda's tight lot the best board, copper especially—earned at the cost of a cramped unload and a gate that favors the early. The spread versus the others is real but narrows on steel; CRV pays near-identically everywhere.

Can I sell without a phone call ahead?

Yes—the Bullis Road counter runs walk-in daily with no listed phone at all, and the others take drive-ups. Calling matters only at day's end, when posted hours and actual gates part company across this corridor.

Why does my copper money take three business days?

State law parks nonferrous payment until the third business day, window or mail. The bypasses are the regulars' lane—five-plus sales a month—business accounts, and small copper-free CRV runs; everything else waits the interval out.

What's the rule on the new copper license?

AB 476, live since January 2026: scrap copper only from CSLB-licensed sellers or those fitting a listed exemption, ownership shown, no minors. Homeowner remodel copper usually finds its exemption—arrive with the project's paper and ask.

What's the smart route for a couch and a water heater together?

Split them: the hauler's free quarterly bulk pickup (six items, 48 hours' notice) takes the couch, and any Alameda scale pays steel money for the heater—pull its brass valve first. Curbing either unscheduled risks a dumping citation.

Are the horse-district's old fixtures sellable?

Stable iron, fence pipe, and tack hardware sell like any steel with your ownership behind them. What never sells is publicly branded gear—anything stamped for a utility, the county, or the streetscape needs the agency's written release first.

Sources and methodology

The Compton board uses the the United States indicative prices: global exchange benchmarks (COMEX copper, CME aluminum and steel, NYMEX platinum and palladium, IMF monthly lead, zinc and nickel) multiplied by typical yard recovery shares, a local market factor of 1.00 and the day's exchange rate. The full method, the recovery shares and the correction policy are on our editorial policy page; local notes on this page are reviewed against published dealer information and reader corrections sent to info@scrappricetoday.com.

Prices are indicative and for information only; they are not offers to buy or sell. Yard quotes in Compton vary by grade, volume, condition and buyer.

Nearby and related

Scrap metal prices in the United States · All countries · Catalytic converter prices